User Tools

Site Tools


networking:containerlab:srv6_default_vrf

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
networking:containerlab:srv6_default_vrf [2026/06/04 12:07] – created jonathannetworking:containerlab:srv6_default_vrf [2026/06/08 13:10] (current) jonathan
Line 11: Line 11:
   * IS-IS is used as the IPv6 underlay.   * IS-IS is used as the IPv6 underlay.
   * Custom MTU handling to accommodate SRv6 encapsulation overhead without impacting standard 1500-byte client MTUs.   * Custom MTU handling to accommodate SRv6 encapsulation overhead without impacting standard 1500-byte client MTUs.
 +
 +{{:networking:containerlab:srv6-default_vrf.png?400|}}
  
 ===== Key Findings & Important Workarounds ===== ===== Key Findings & Important Workarounds =====
Line 1079: Line 1081:
 interface eth2 interface eth2
  description "to p1 - eth2"  description "to p1 - eth2"
- ipv6 address 2001:db8:12::4/64+ ipv6 address 2001:db8:14::2/64
  ipv6 router isis SR  ipv6 router isis SR
  isis network point-to-point  isis network point-to-point
networking/containerlab/srv6_default_vrf.1780574825.txt.gz · Last modified: by jonathan